![Wilson Super Tour 9 Pack Clash V2 Tennis Bag [WS]](https://www.uarrzowl.shop/image/wilson-super-tour-9-pack-clash-v2-tennis-bag-ws_oeFleY_285x.webp "Wilson Super Tour 9 Pack Clash V2 Tennis Bag [WS]")
MakerBot METHOD X ABS Filament
ABS (acrylonitrile butadiene styrene) is one of the most common plastics used in injection-molding, found in many common products such as LEGOS, computer keys, power-tool housings, and automotive parts. MakerBot ABS is engineered without modifiers to best match the performance characteristics of injection molded ABS.
Smart Spool™ provides valuable information including material type, color, and amount remaining via an RFID chip directly to MakerBot Print, while a desiccant in the spool maintains a low moisture level inside the drawer bay.
Store in the included a vacuum-sealed metalized polyester bag to avoid moisture absorption from air; long-term exposure to humidity can compromise material quality and performance. Make sure the built-in desiccant is in the spool to absorb any moisture exposure during the material loading process.
- Spool Diameter: 21.8 cm (8.6 in)
- Spool Width: 4.2 cm (1.65 in)
- Material Diameter: 1.75 mm/ s
- Heat Deflection @ 66 psi - ASTM 648:84°C (183°F)
- Flexural Strength (Method 1, 0.05”/min):65 MPa (9,427 psi)
- Flexural Modulus (Method 1, 0.05”/min): 77 Mpa (11,200 psi)
- Tensile Strength at yield ((Type 1, 0.125”, 0.2”/min):43 Mpa (6,236 psi)
- Tensile Modulus (ISO 527):2,400 MPa (348,090 psi)
- Strain at Yield - Elongation (%):2.6%
- Notched Impact Strength (ASTM D256):26 J/m (0.48 ft-lb/in)
